Pay in installments of $5.04 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex carseat Cybex Gold Eternis S Sensor Safe All-In-One Car Seat – Swaddles BabyThe CYBEX Eternis S with SensorSafe is the only seat your child will need from birth and beyond. With three modes rear facing, forward facing, and booster, this All In One Convertible Car Seat is designed for use from birth up to 120 lbs. The Eternis S with SensorSafe features Linear Side impact Protection, and a patented 3 position reclining headrest that guides the childs head and neck into a proper position while they are asleep. With SensorSafe
The CYBEX Eternis S with SensorSafe™ is the only seat your child will need from birth and beyond. With three modes - rear-facing, forward-facing, and booster, this All-In-One Convertible Car Seat is designed for use from birth up to 120 lbs. The Eternis S with SensorSafe features Linear Side-impact Protection, and a patented 3-position reclining headrest that guides the child’s head and neck into a proper position while they are asleep. With SensorSafe™ technology, you'll gain instant insight into your child's well-being—right to the SensorSafe app on your phone. Built into the chest clip of CYBEX car seats, SensorSafe provides alerts when unsafe situations arise including if a child unbuckles themselves; if the back seat has become too warm or too cold if a child has been seated for too long, and if the driver accidentally leaves the child behind.
Specifications
- Rear-facing from 4 lbs. to 50 lbs. Forward-facing from 22 lbs. to 65 lbs., Belt-positioning Booster from 40 lbs. to 120 lbs.
- SensorSafe™technology uses a Bluetooth-enabled chest clip to send mobile app alerts when potential unsafe situations arise (not used in Belt-positioning Booster mode).
- Linear Side-impact Protection absorbs up to 25% more impact forces in a collision (when compared to the same car seat without L.S.P. extended).
- Patented 3-position reclining headrest helps prevent the child's head from falling forward while asleep, keeping the head and neck in a proper position.
- In-seat recline provides correct ergonomic positioning and extra legroom, allowing your child to ride rear-facing longer.
- 12-position, height-adjustable headrest with a no-rethread harness.
- 6-position one-hand adjustable recline for the best fit to your car.
- Magnetic buckle holders for easy entry and exit from the seat.
- Removable newborn insert provides support from 4 to 11 lbs.
- Dishwasher-safe cup holder can be positioned on either side.
- Harness pads and 2-position padded buckle.
- Steel reinforced frame provides strength and durability.
- Energy-absorbing shell and base help reduce the forces felt by the child in a collision.
- Dual-level indicators to help ensure the proper angle.
- Innovative one-pull LATCH removal system.
- LATCH Connection storage provided under the seat when not in use.
- Designed and engineered in Germany.
- 2-year warranty.
Dimensions & Weight
- H 25.5” x W 20” x D 25.3”
- 26 lbs.
- Use from birth up to 120 lbs. or 57 inches.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 9 reviews
Sort
Product Reviews
★★★★★ 5
Excellent sound and function
Set name: 5.1 Receiver
We're very pleased with this unit. We use a 3.1 system in our TV area, stereo plus center channel and subwoofer. It's nice that this unit supports that. We get very nice imaging from this, and don't really miss the surround speakers.
**We had to replace the old HDMI cables with new ones that could handle the larger bandwidth of 4K. If you're cables are 5-10 years old like ours, newer cables are required to carry a modern video signal.
We like the Yamaha sound, and are able to EQ it easily to sound right for the room. I've used several receivers over the years of various brands. Yamaha consistently delivers good sound and reliable product. I've never had a Yamaha product fail and fewer than 15 years.
There are other units out there with more gadgets and gizmos, bills and whistles, not to mention smoke and mirrors. We want a good sounding reliable unit that plays nice with all of our AV sources and TVs. If that's what you're looking for, look no further than this unit right here.
If you get a good price on this, it's unbeatable.
Sony, Onkyo, Denon, Marantz, etc. - they all make good units with signature sounds. If you aren't familiar with them, and If you can't listen to a bunch of stuff, buy this with confidence.
Here's an unsolicited recommendation: high quality speakers will do more to improve your listening experience than any receiver. If you're looking for an upgrade, start with your front speakers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2024
★★★★★ 5
Love my Yamahas
Set name: 5.1 Receiver
RX 385 replaces my much-loved 10 year old RX 375, which I inadvertently fried while experimenting.
The 385 has some newer features, including bluetooth. The old model and this both use the handy YPAO function to tune the audio speakers' depth of field to the listening environment. It's a broadcast mic that you just plug into the front of the receiver for a few seconds to determine each speakers' distance from viewer. Kind of a sonic echo measurement of seating to speaker. It's a foolproof, remarkably clever, timesaving gizmo. The YPAO mic is absolutely included with this unit, looks like a little plastic cone.
Also important to me, Yamaha has replaced the old spring clips for rear/side speakers, which are now the better screw and cap posts, as they have always been for the two front speakers.
I recommend rocketfish HDMI 4k/8k cables to connect this receiver to your tv and to whatever other components you want, such as a bluray. Sound quality is excellent if your speakers are good. (I like KEFs.)
Of course you may prefer wireless speakers, but I'm already committed to wired ones. I used rocktfish banana plugs to connect my speaker wires to the RX 385 receiver's speaker posts. Neat and clean.
With a choice of 2 front, 2 rear, 1 center speaker, plus one coaxial plug in for a subwoofer, your movies and programs are going to sound far more detailed and staged than you'd get from the tv or a sound bar. It's a more immersive and compelling experience. (I use only 2 fronts and 2 rears and don't feel I'm missing anything.)
Yamaha receivers and other components are my favorites: relatively inexpensive, well designed, solidly built, and not fussy to install. If you find yourself in a pickle there are a couple of helpful youtube videos.
I find with the RX385 again that Yamaha does not disappoint me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2023
★★★★★ 5
Great unit
Set name: 5.1 Receiver
Works great, was worried about having my hdmi run through it thinking id have to use it all the time but leaving it off the signal still goiles through to the TV. Very rleasy to hook up and very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2026
★★★★★ 5
real time and energy saver, as well as $
Size: 16AWG Wiring Harness-2 Leads
If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2024
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020